|
|
89225
USED: Farrel Banbury mixer, model F80. Jacketed chamber, drop door design. 4 wing style cored rotors, approximately 35-70 rpm. Mixing chamber 80 liter, max batch weight 132 pounds. Ram feed. Driven by a 600 hp DC motor with SCR controller. Includes a hydraulic system, lube system, temp control panel and a Farrel Series 2000 operator panel. Built 1999. details
|
89079
USED: Farrel Banbury mixer, model F80. Approximate 80 liter, 21 gallon, 116 pound working capacity. Chrome plated chamber, carbon steel jacketed, drop door design. Wing style cored rotors, approximately 30-105 rpm. 10-1/2" x 24" feed opening with ram feeder. Driven by a 400 hp, 500 volt, 1150/2300 rpm DC motor thru a Farrel gearbox, drive ratio 11.652:1. details
|
|
|
85929
USED: Farrel Banbury mixer, model 00C. Jacketed chamber, drop door design, rated 150 psi water or steam. Wing style cored rotors, approximately 125/62.5 rpm. Gross chamber liquid capacity 1.2 gallons. Max batch weight 7 pounds. Ram feed. Driven by a 30/15 hp, 3/60/440 volt, 1750/860 rpm motor. Includes a control panel with an ABB model ACS501 drive panel. details
|
82962
USED: Farrel Banbury mixer, model OOC. Carbon steel jacketed chamber, stainless steel swing side design. Chrome plated cored rotors. Gross chamber liquid capacity 1.2 gallons, max batch weight 7 pounds. Ram feed. Driven by an 84 kw (112 hp), 3/60/460 volt, 1700 rpm DC motor. Includes a control panel. Built 1986. details
|
77157
USED: Moriyama dispersion mixer, batch mixer/compounder, type D3-7.5. 3 liter mixing capacity, 8 total. Jacketed bowl 6-5/16" left to right x 9-1/4" front to back x approximately 12" deep. Cored blades. Rotor speeds front approximately 25 to 100 rpm, rear approximately 16.7 to 66.7 rpm. Single ram air cylinder feed, manual crank tilt bowl. Driven by a 5.5 details
|
|
|
|
|
69846
USED: Stewart Bolling spiral flow laboratory mixer, carbon steel. Approximately 9" wide x 9" long x 9" deep jacketed mixing chamber. Chrome plated cored blades, single ram cylinder feed, geared both ends. 2 hp hydraulic tilt. Driven by a 30/15 hp, 460 volt, 1775/885 rpm motorthru a reducer, ratio 14:1. Unitized on a common frame with controls. details
|
68412
USED: Farrell Banbury mixer, model 00C. Stainless steel jacketed swing side (drop door design). Max steam or water psi 150, chrome plated two wing cored rotors with spherical roller bearings, gross capacity of mixing chamber 4.24 liters. 5" diameter ram cylinder, max pressure 100 psi. Chrome plated single slope V-bottom, stainless steel, pneumatically operated details
|
|
|
28647
Used- Farrel-Birmingham Banbury Mixer, Model B, Carbon Steel. 2.6 pound capacity, side open design. Air operated feed ram with flat style floating weight. Two wing rotor. 4 speed drive. Driven by a 25/17/12/8.35 HP, 3/60/220 Volt, 1750/1160/ 870/575 RPM, output 230/155/116-77 RPM. Includes a knee safety and a Master Unibrake. details
|
20968
Used- Banbury Mixer, Model 00, Carbon Steel. Chrome plated steel rotor, body and ends. Capacity 5 pound at 1.25 SP gravity, cored rotors & bowl. Flat style floating weight. Side open swing doors (2 wing rotors) direct driven by 10 HP, 3/60/220/440 Volt, 1800 RPM US Synchrogear motor, 16.9:1 ratio, output 100 rpm. details
|