|
|
87615
NEW: IMM ACM type classifier pulverizer, model JCL320, 304 stainless steel. Max capacity 66-880 pounds per hour, air volume 529 cfm. 12-1/2" diameter grinding chamber with liner. Approximate 12" diameter 8 blade rotor driven by an 8.5 kW (11.5 hp), 3/60/440/480 volt, 3510 rpm motor, max rotor rpm 6880. Approximate 7" diameter top mounted separator wheel details
|
522937
USED: Rotomill model 500-5 300 hp pulverizing rotor. Includes RotorMill, model 4500-5, mfg 11/2000. 250 hp, 1784 rpm, 480 volt. Filter baghouse: Camcorp model 7BH8X56. Blower: Chicago size #I, 40 hp, 3550 rpm, 240/480 volt. Foseberg screener: model 18X4800, 240/480 volt. Conveyor: Versa Corporation model N/A, 2 hp, 240/480 volt, 16' long x 26" wide. details
|
|
|
522712
USED: Prater grinder/classifier mill, model CLM75, carbon steel construction. With approximate 9.5" x 9.5" feed opening into mill and 9.5" x 8" discharge from classifier. Swing open door for easy cleaning. Unit offers two stage closed circuit grinding with inter-stage air classification. Belt drive 75 hp, 3/60/460V, 92 amp. 10 hp, 3/60/230/460V classifier details
|
86594
USED: Mikro pulverizer, carbon steel. Approximate 20" diameter x 12" wide rotor with 16 rows of 4 swinging stirrup hammers. 13" x 15" top feed with 304 stainless steel hopper, triple screw chamber feed, approximate 2" diameter x 8" long screws, driven by a 1-1/2 hp, 3/60/230/460 volt, 1750 rpm XP gearmotor, ratio 3.6:1. Main drive is a 30 hp, 3/60/208-220/440 details
|
86595
USED: Mikro pulverizer, carbon steel. Approximate 20" diameter x 12" wide rotor with 16 rows of 4 swinging stirrup hammers. 13" x 15" top feed with 304 stainless steel hopper, triple screw chamber feed, approximate 2" diameter x 8" long screws, driven by a 1-1/2 hp, 3/60/230/460 volt, 1750 rpm XP gearmotor, ratio 3.6:1. Main drive is a 30 hp, 3/60/208-220/440 details
|
|
|
522018
USED: Netzsch-Condux double driven air classifying mill, type CSM560. Material of construction is stainless steel on product contact parts. Carbon steel housing and frame. Inside (1) 41" (1044mm) diameter grinding/milling disc with a speed of max 2100 rpm by a 75 hp/380-400 volt/50 cycle/3 ph belt driven XP motor and (1) 22" (560mm) diameter classifier details
|
|
|
83753
USED: Mikro pulverizer model 1SH, carbon steel. Approximate 6" diameter rotor with (6) 3" wide swinging stirrup hammers. 1-1/2" diameter x 8" long screw feed with hopper, driven by a 1/3 hp, 1/60/115/230 volt, 1720 rpm motor. Pulverizer driven by a 5 hp, 3/60/220/440 volt, 3500 rpm motor. Bottom discharge. Unit mounted on a carbon steel stand with casters. details
|
|
|
|
|
83249
USED: Mikro pulverizer, model 3TH, carbon steel. 14" diameter x 14" wide rotor with approximately 14 rows of 4 swinging stirrup hammers. Triple screw feed with hopper, approximately 3" diameter screws, driven by a 2 hp, 3/60/208-230/460 volt, 1730 rpm motor, bottom screen, set up for blower discharge. Main drive is a 30 hp, 3/60/230/460 volt, 3560 rpm details
|
|
|
|
|
REQUEST PRICE QUOTE
HP: 5
Manufacturer: Mikro Corporation
Model: 1SCB
Material: 304 Stainless Steel
81861
USED: Mikro Pulverizer, model 1SCB, 304 stainless steel. Approximate 6" diameter rotor with (6) 3-1/4" wide swinging stirrup hammers. Set up for air injection feed and cryogenic design. Unit driven by a 5 hp, 3/60/230/460 volt, 3495 rpm motor. Includes bottom discharge container. Unit mounted on a carbon steel stand with casters. details
|
|
|
79946
USED: Micron Powder Systems (Majac) model A-12 Accucut classifier. Complete package system uses a high speed, high energy air classification principle to disperse and separate ultra fine powders. Processes 0.5 to 50 micron powder fractions at feed rates up to 3500 pounds per hour accurately, reproducibly and efficiently. details
|
79880
USED: Alpine Rotoplex vertical cutting mill, model A16/8, carbon steel. 10" x 9" x 3" deep chamber with (2) 3" wide bolt-on blade rotor, (2) bed blades. Approximate 3/8" diameter screen holes. Top feed chute, side discharge. Driven by a 1.5 kw (2 hp), 550 volt, 1710 rpm motor. Mounted on a base with casters. details
|
|
|
|
|
|
|
|
|
|
|
|
|
71957
Used- Mikro Pulverizer, Model 4TH, Carbon Steel. 20" diameter x 12" wide rotor with 8 rows of 4 LFS stirrup hammers. 3 approximate 2" diameter screw feed driven by a 1-1/2 hp DC motor. Main drive is a 15 hp, 3/60/230/460 volt, 1760 rpm motor. Includes bottom screen. Unit mounted on a 42" wide x 60" long x 26" high stand. details
|
|
|