English

Deutsch

Buscar por Aaron # de Inventario / Palabra Clave

Carro de Compras | E-mail Aaron | 630-350-2200
¡Visita Nuestro Blog! | Suscribirse

Compras Recientes Recondicionamiento Servicios de Avalúo ¡Estamos buscando equipo para Comprar! Remates en Curso

Términos y Condiciones Herramientas de Conversión

Doble Husillo Co Rotante Plasticos - Extrusoras

Envía E-mail de esta pagina Versión Imprimible Venda su Maquinaria

Doble Husillo Co Rotante Plasticos - Extrusoras - 48 Venta

»Haz clic sobre enlaces para ver información detallada y fotos adicionales


More Info Diameter (in.): 6.63 HP: 2700 Manufacturer: Werner Pfleiderer Model: ZSK170 42294002 Used-Werner Pfleiderer Twin Screw Extruder, type ZSK170. 6.63" (170 mm) diameter screws, side by side. Max screw speed 120 rpm with an output of 11 tons of PP per hour. Electrically heated, water cooled barrel. Driven by an 1800 kW/2700 hp frequency regulated motor. Overall dimensions: 32'5" long x 13' wide x 9'8" high (10,000 mm long x 4000 mm wide x 3000 details
More Info Diameter (in.): 6.63 HP: 2700 Manufacturer: Werner Pfleiderer Model: ZSK170 42294001 Used-Werner Pfleiderer Twin Screw Extruder, type ZSK170. 6.63" (170 mm) diameter screws, side by side. Max screw speed 120 rpm with an output of 11 tons of PP per hour. Electrically heated, water cooled barrel. Driven by an 1800 kW/2700 hp frequency regulated motor. Overall dimensions: 32'5" long x 13' wide x 9'8" high (10,000 mm long x 4000 mm wide x 3000 details
More Info Diameter (in.): 1.57 HP: 15 Manufacturer: AMERICAN MAPLAN Model: CON-40 42230001 Used- American Maplan 40mm Conical Counter-Rotating Twin Screw Extruder, Model CON40. Counter-rotating screw design. Electrically heated, air cooled, 4 barrel zones, 3 die zones. Driven by a 15 hp, DC motor. Approximately 40'' centerline height. Includes a control panel with controllers, a Powertec 500 drive, and a Quantum III DC drive. (1) Feed hopper, details
More Info Diameter (in.): 2.24 HP: Manufacturer: Model: 42158001 Used-Werner &Pfleiderer 57mm Extruder Model ZSK57W50P8N twin screw. side by side. with a 100 hp DC drive and a 3,015:1 gear box. The output speed i$ 580 (pm, It has eight barrel sections and an 8/0 section.There are barrel sections are heated with four electric heater zones. which also have a water cooling The processing section is 1440 mm long, Bought 1988.Acrison details
More Info Diameter (in.): 3.35 HP: 36 Manufacturer: Maris Model: TM 85 41175002 Used-Maris TM 85 Twin Screw Extruder. Co-rotating, 2 x 3.35" (2 x 85 mm) screws, L/D 24, 36 hp/27 kW DC motor with inverter, string die for 16 strings, 11 heating zones and control panel. details
More Info Diameter (in.): 3.5 HP: 400 Manufacturer: Berstorff Model: ZE90AX31DUT 42166001 Used- Berstorff Model ZE90AX31DUT Ultra Torque Co-Rotating Twin Screw Extruder having two 97mm diameter intermeshing screws with a 31:1 L/D ratio. Electrically heated, water cooled barrel consists of six sections: four (4) closed, one (1) feed (open), and one (1) vacuum vent section. Gearbox has a reduction ratio of 5.0:1 and is direct driven by a 400 hp, 1150 details
More Info Diameter (in.): 2.75 HP: 300 Manufacturer: WERNER PFLEIDERER Model: ZSK 70 W 175E 42103001 Used- Werner & Pfleiderer 70mm Twin Screw Extruder/ Compounder, Type ZSK 70W 175E. Co-Rotating intermeshing side by side screw design. Approximate 28 to 1 L/D ratio. 6 Barrel sections, (1) vented with a vent stack, (1) feed section, no hopper, electrically heated, water cooled (no system). Approximate 40’’ centerline height. Driven by a 300 hp, 460 volt, details
More Info Diameter (in.): 1.18 HP: Manufacturer: Berstoff Model: ZE25-35D 42100004 Used- Berstoff lab size twin screw extruder, type ZSK30, 30 mm diameter screws, 35:1 L/D, co-rotating, 6 heating zones, electrically heated, water cooled, max screw speed 300 rpm via a gearbox by a motor, including control panel. details
More Info Diameter (in.): 1.18 HP: Manufacturer: Model: ZSK30 42100003 Used- Coperion Werner & Pfleiderer lab size twin screw extruder, type ZSK30, 30 mm diameter screws, 38:1 L/D, co-rotating, 9 heating zones, electrically heated, water cooled, max screw speed 500 rpm via a gearbox by a motor, including control panel, (2) Werner & Pfleiderer twin screw side feeder, including Siemens S-7 control panel. details
More Info Diameter (in.): 1.18 HP: Manufacturer: Model: ZSK30 42100002 Used- Coperion Werner & Pfleiderer lab size twin screw extruder, type ZSK30, 30 mm diameter screws, 33:1 L/D, co-rotating, 9 heating zones, electrically heated, water cooled, max screw speed 300 rpm via a gearbox by a motor, including control panel, (2) Werner & Pfleiderer twin screw side feeder, including Siemens S-7 control panel. details
More Info Diameter (in.): 1.18 HP: Manufacturer: Model: ZSK30 42100001 Used- Coperion Werner & Pfleiderer lab size twin screw extruder, type ZSK30, 30 mm diameter screws, 34:1 L/D, co-rotating, 9 heating zones, electrically heated, water cooled, max screw speed 500 rpm via a gearbox by a motor, including control panel, manufactured 1994. details
More Info Diameter (in.): 1.96 HP: 27.75 Manufacturer: APV Model: 42088001 Used- APV Twin Screw Extruder, 50mm Screw Diameter. Approximately 15 to 1 L/D ratio. Co-rotating screw design. Vented electrically heated, water cooled barrel. (1) feed section. Driven by a 18.5kw (27.75hp), 3/50/380 volt, 1470 rpm motor. Includes a control panel, and a touch tone panel. details
More Info Diameter (in.): 1.8 HP: 22.5 Manufacturer: Automatik Model: ZCM 41/46 41822004 Used-Automatik Co-Rotating Twin Screw Extruder, Model ZCM 41/46. Screw diameter 1.8" (46 mm), screw length 61.4" (1560 mm), 22.5 hp/16.8 kW DC drive, screw speed 305 rpm, temperature max 482 deg F (250 deg C), with control cubicle (without thyristor), 12 temperature zones, weight 1.1 tons (1000 kg), size 10.6' x 2.5' x 6.4' (3250 x 750 x 1950 mm). details
More Info Diameter (in.): 2.28 HP: 50 Manufacturer: WERNER & PFLEIDERER Model: CONTINUA 58/28 41651018 Used- Werner & Pfleiderer 58mm Continua Twin Screw Extruder, Type 58/28. Co-rotating intermeshing side by side screw design. Approximate 28 to 1 L/D ratio. 5 barrel sections, 1 feed section with hopper, liquid heated and cooled. Approximate 42'' centerline height. Driven by a 50 hp, 500 volt, 1750 rpm motor thru a gearbox. Extruder mounted on a carbon details
More Info Diameter (in.): 1.2 HP: Manufacturer: APV Model: MP2030 41722005 Used-APV MP2030 Twin Screw Extruder, co-rotating. With 1.2" (30 mm) screw, 11 L/D ratio, screw speed 500 rpm, water cooled. details
More Info Diameter (in.): 3 HP: 152 Manufacturer: APV Model: MP2080 41722004 Used-APV MP2030 Twin Screw Extruder, co-rotating. With 3" (77 mm) screw, 16 L/D ratio, screw speed 50-350 rpm, 152 hp (115 kW) motor, water cooled, with 5 heating zones. New 1990. details
More Info Diameter (in.): 2 HP: 15 Manufacturer: Kurimoto Osaka Model: 10147023 Used-Kurimoto Osaka Double Screw Extruder. Screw diameter 2" (50 mm), length 26" (660 mm), L/D 13.2 with oil heating. AC motor 15 hp/11.0 kW, 400/690 volt (EX), with variable speed drive, without switchgear. Overall dimensions 7.2' x 3.6' (2200 x 1100 mm), total height 8' (2400 mm), weight 1.8 tons (1600 kg). details
More Info Diameter (in.): 7 HP: 1013 Manufacturer: Werner Pfleiderer Model: ZSK-170 W-1750 5G 10147004 Used- Werner & Pfleiderer double screw extruder, type ZSK-170 W-1750 5G, serial No. 221 071, new 1986, screw diameter 170 mm (7''), screw length 2500 mm (100''), L/D 14.7, co-rotating, electric heating on housing no. 2, 3, 4 and 5, 65.8 kW (88 hp), DC motor 760 kW (1013 hp), 6000 volt, screw speed ± 198 rpm, without switchgear, used on DMD, floor space details
More Info Diameter (in.): .98 HP: 7.4 Manufacturer: BERSTORFF Model: ZE25 41350001 Used- Berstorff 25mm Twin Screw Extruder, type ZE25, co-rotating intermeshing side by side screw design. Approximate 33 to 1 L/D ratio. 6 barrel sections, 1 feed section with a top mounted K-Tron type S200 feeder, 1 die adapter, electrically heated, air cooled. Approximate 43-3/4" centerline height. Driven by a 5.5 kW, 3/50/380 volt, 2550 rpm motor thru details
More Info Diameter (in.): .98 HP: 14 Manufacturer: BERSTORFF Model: ZE25 41350002 Used- Berstorff 25mm Twin Screw Extruder, type ZE25, co-rotating intermeshing side by side screw design. Approximate 38 to 1 L/D ratio. 7 barrel sections, 1 feed section, 1 2 hole strand die. Electrically heated, air cooled. Approximate 46" centerline height. Driven by a 10.5 kW, 3/50/380 volt motor thru Flender reducer. Includes a Brabender type DDSR20 details
More Info Diameter (in.): 1.2 HP: 8 Manufacturer: Werner Pfleiderer Model: ZSK 30 41200007 Used-Werner-Pfleiderer ZSK 30 M9/2 Twin Screw Co-Rotate Extruder, built 1984. Screw diameter 30 mm (1.2''), 6 kW (8 hp) motor. details
More Info Diameter (in.): 1.18 HP: Manufacturer: Werner Pfleiderer Model: ZSK 30 41175001 Used-Werner Pfleiderer Twin Screw Extruder, type ZSK 30, 2 x 30 x 25 L/D. From 1975, rebuilt by Plastico Trading in 1999. With degassing port. details
More Info Diameter (in.): 1.2 HP: Manufacturer: Baker Perkins Model: MPC/V 30 10665013 Used- Baker Perkins Guittard 30mm (1.2’’), 10:1 L/D cross head extruder, model MPC/V 30, co-rotating with 3 kW (4 hp) DC motor. Electrically heated barrel. details
More Info Diameter (in.): 2.2 HP: 110.25 Manufacturer: Werner Pfleiderer Model: ZSK58 40956001 Used-Werner Pfleiderer Twin Screw Extruder, Type ZSK58F. 58mm (2.2" diameter) screws, 30:1 L/D, side by side, co-rotating. 7 housing sections, 2 vent ports. Electrically heated, water cooled. Max screw speed 300 rpm via a gearbox by a 110.25 hp/73.5 kW-380 volt/50 cycle/3 ph motor. (1) 21 hole die head. (1) Double water bath, stainless steel. (1) Rieter-Automatic details
More Info Diameter (in.): .98 HP: 7.5 Manufacturer: BERSTORFF Model: ZE25 40733010 Used- Berstorff 25mm Twin Screw Extruder, model ZE25, co-rotating side by side screw design. Approximate 28 to 1 L/D ratio. 6 barrel sections (3) vented, electrically heated, air cooled, 1 feed section with (2) ProRate dosing feeders. Approximate 43 1/2" centerline height. Driven by an approximate 7 1/2 hp DC motor thru a gearbox. Includes a control panel details
More Info Diameter (in.): HP: Manufacturer: Battenfeld Model: 40660001 Used-Battenfeld Profile Line consisting of: (1) Battenfeld-Bex 2-90-22V/3 counter-rotating, parallel screws, 22 LD, TC 40 steering, Gravimetric dosing, vacuum degassing, main drive 60 kW DC. (1) Battenfeld K160 V2 calibration table 3m including (2) vacuum pumps / 5.5 kW. (1) Battenfeld P 200 / 350 S 2 belt haul-off, rubber width 350 mm. (1) Battenfeld SPR 200 A details
More Info Diameter (in.): 133 HP: 1650 Manufacturer: Werner Pfleiderer Model: ZSK-M151000 40656002 Used-Coperion Werner & Pfleiderer Twin Screw Extruder, type ZSK-133-M151000. Capacity 4 tons per hour. 27:1 L/D. 133 mm diameter x 3571 mm long screws. Co-rotating. Max screw speed 400 rpm. Electrically heated, water cooled. Includes gearbox by an approximate 1100 kW/1650 hp motor. (1) Double screen changer, (1) die head, (1) Coperion Werner & Pfleiderer details
More Info Diameter (in.): 1.45 HP: 25 Manufacturer: FARRELL Model: FTX80 40497001 Used- Farrell Twin Screw Extruder, 37 mm, model FTX80. Co-rotating screw design. Approximately 36 to 1 L/D ratio. 4 barrel segments, 1 vented, 1 feed section no hopper. Electrically heated, water cooled, no cooling system. Driven by a 25 hp, 500 volt, 1750/2300 rpm DC motor. Flender gearbox ratio 3.591 to 1. Approximately 43'' centerline height. Includes details
More Info Diameter (in.): .9 HP: 7.5 Manufacturer: BERSTORFF Model: ZE25 40472001 Used- Berstorff 25mm Twin Screw Extruder, model ZE25. Co-rotating side by side screw design. Approximately 28 to 1 L/D ratio. 5 barrel sections, electrically heated, air cooled, 1 feed section. 46" centerline height. Driven by a 7 1/2 hp, 240 volt, 1750/2300 rpm DC motor thru a gearbox. Includes a control panel with Eurotherm 808 controllers and a Reliance details
More Info Diameter (in.): 3.9 HP: 50 Manufacturer: Baker Perkins Model: 10288003 Used-Baker Perkins 100 mm twin screw compounding extruder. Segmented twin screws. 50 hp DC Siemens Allis main drive motor. Barrel is 40" long, clamshell type, jacketed. Barrel lining has been removed and is not available. A pallet of spare screws is included. Screws are cored and fitted with rotary unions for cooling. Equipped with a control panel. details
More Info Diameter (in.): 1 HP: Manufacturer: Werner Pfleiderer Model: ZSK-30 10288002 Used-W P twin screw extruder, model ZSK-30. 30 mm screw diameter, co-rotating, electrically heated, water cooled barrels, 3 open/vented. Manufactured 1980. Driven by a 6 kw DC drive. Including die. details
More Info Diameter (in.): 1.5 HP: 50 Manufacturer: Werner Pfleiderer Model: 11453020 Used: Werner Pfleiderer twin screw extruder, type 25K40F-32.5E. 40 mm screws, co-rotating, 40:1 L/D, electrically heated, water cooled, 10 barrel sections with (1) feed, (1) vented with side feed port, (2) spacers and (6) non-vented sections. 50 hp DC motor with SCR controller, W&P control panel with 5 barrel zones, 500 rpm screw speed, with Brabender feeder and details
More Info Diameter (in.): 1.5 HP: 40:1 Manufacturer: 50 Model: Werner & Pfleiderer 11453000 Used: Werner & Pfleiderer twin screw extruder, type 25K40F-32.5E. 40 mm screws, co-rotating, 40:1 L/D, electrically heated, water cooled, 10 barrel sections with (1) feed, (1) vented with side feed port, (2) spacers, and (6) non-vented sections, 50 hp DC motor with SCR controller, W&P control panel with 5 barrel zones, 500 rpm screw speed, with Brabender details
More Info Diameter (in.): 2.36 HP: 50 Manufacturer: Krauss Maffei Model: KMD 260KK 524013 USED: Kraus Maffei 2.36" twin screw extruder (60-125 mm, conical, co-rotate), type KMD 260KK. Length of screw 51.2" (1300 mm), driven by a 50 hp (37 kW) motor, max 38 rpm, screw heating 6 kW, screw cooling 7 kw, 4 zones on barrel, output 220 kg per hour. Used for PVC window profiles. Includes control panel. details
More Info Diameter (in.): 4.3 HP: Manufacturer: Kastermann Model: 523860 USED: Kastermann double screw extruder used in a laboratory. Diameter 4.3" (110 mm), 25 L/D, used on PS and EPDM. Includes control panel, die head, screen changer. Output 300 kg/h. details
More Info Diameter (in.): 1.57 HP: 50 Manufacturer: Maris Model: TM40WW 89087 USED: Maris 40 mm twin screw extruder, model TM40WW, serial #010990. Approximately 40:1 L/D ratio. Co-rotating screw design. 9 barrel sections measuring from the back of the feed barrel to end barrel is 62", (1) vented. Electrically heated, water cooled (no system). Die clamp, (1) water cooled feed section. Driven by a 50 hp, 500 volt, 1750-2100 rpm DC details
More Info Diameter (in.): 1.57 HP: 40 Manufacturer: Berstorff Model: ZE-40 523562 USED: Berstorff model ZE-40 twin screw extruder. 40 mm diameter screw, co-rotating, 40:1 L/D with 8 barrel sections, electrically heated, air cooled, with (2) side feeders, vented barrel, belt driven with 40 hp DC motor, 10 zone control panel with Eurotherm controllers, with K-tron feeder, 10 hold strand die. New 1987. details
More Info Diameter (in.): 1.18 HP: 13.95 Manufacturer: Werner Pfleiderer Model: ZSK 30 523053 USED: Werner Pfleiderer 1.18" (30mm) twin screw extruder, type ZSK 30.10. 4 kW variable speed drive, max rpm 300, 5 heating zones, degassing, output 66 lbs/hour, spaghetti head. details
More Info Diameter (in.): 2.16 HP: 50 Manufacturer: Baker Perkins Model: MP2050 86715 USED: Baker Perkins Twin Screw Extruder. 50 mm screw diameter, model MP2050. Approximate 25:1 L/D ratio. Co-rotating screw design. Clamshell design, 5 zone electrically heated, water cooled barrel sections. Water cooled feed section, (1) die section. Approximate 44" centerline height. Driven by a 50 hp, 3/60/230/460 volt, 1770 rpm hydraulic power pack details
More Info Diameter (in.): 1.9 HP: 25 Manufacturer: APV Model: F23215 86493 USED: APV Baker Twin Screw Extruder, 50 mm screw diameter, model F23215. Approximate 14:1 L/D ratio. Barrel is clamshell design. Approximate 28" long screw length. Electrically heated, water cooled. Front mounted single hole die. Extruder is driven by a 25 hp DC motor. Panel includes a Quantum 3 DC drive. Unitized on a skid with casters including a console details
More Info Diameter (in.): 1 HP: 15 Manufacturer: Berstorff Model: 2E25X38D 522065 USED: 25mm Berstorff twin screw extruder, model 2E25X38D. 38:1 L/D, electrically heated, air cooled, (8) total barrel sections with (4) vented, (1) feed, (3) non-vented sections, 15 hp DC motor with SCR controller, Berstorff control panel with (7) barrel zones and (1) adapter zone, with Eurotherm temperature controllers, on board Nash vacuum pump, with stainless details
More Info Diameter (in.): 2.362 HP: 150 Manufacturer: Berstorff Model: ZE60 84306 Used- Berstorff twin screw extruder, model ZE60. 23:1 L/D ratio, 60 mm screw diameter. 5 barrel sections, vented, electrically heated, water cooled. No cooling system. Driven by a 150 hp 500 volt, 1750/2000 rpm DC motor. Unit includes: transformer, control cabinet and a control console including 808 controller. Last used in pelletizing. details
More Info Diameter (in.): .7 HP: 3 Manufacturer: Leistritz Corporatio Model: MICRO-18G/40D 521954 USED: Leistritz twin screw co-rotating multi-mode extruder, model Micro-18G/40D. 18 mm screw diameter, 40:1 L/d ratio, electrically heated, water cooled. 10 total barrel sections with 1 feed, 6 closed, 2 vented and plugged, 1 vented. Approximate 3 hp DC motor with controller. On base with 8 zone control panel. Also includes water bath and strand pelletizer. details
More Info Diameter (in.): 2.36 HP: 60 Manufacturer: Berstorff Model: ZE60X33D 521809 USED: Berstoff twin screw extruder, type ZE60x33D. 60 mm screws, 33:1 L/D, side by side, co-rotating, electrically heated, water cooled. Screw speed 30-300 rpm by a 90 kw/60 hp-460 volt/50 cycle/3 ph motor via a gearbox. (1) 3.6" (90mm) double screen changer, (1) ring die head. Complete with downstream equipment and control panel. details
More Info Diameter (in.): 0.98 HP: 15 Manufacturer: BERSTORFF Model: ZE25 82290 USED- Berstorff Lab Size Twin Screw Extruder, Type ZE25. 25 mm screws. 33:1 L/D. Side by side, co-rotating, 11 barrel sections, electrically heated. Max screw speed 550 rpm by a 9/10/11 kW, 3 ph/52/60/68 hz/336/381/433 volt, 1500/1750/2000 rpm motor thru a gearbox. (2) Control panels. Mounted on casters. details
More Info Diameter (in.): 2.4 HP: 105 Manufacturer: OMC Model: 520649 Rebuilt OMC twin screw extruder. 16:1 L/D, 2.4" diameter (62mm) x 33.8" straight side (868mm), twin screws co-rotating. Max screw speed 500 rpm via a gearbox by a 105 hp/70 kw, 400 volt/50 cycle motor. Complete with a volumetric feeding system. details
More Info Diameter (in.): 2.96 HP: Manufacturer: Berstorff Model: ZE75A 80190 USED: Berstorff 75mm twin screw extruder, model ZE75A. 16:1 L/D, 4 zone electrically heated, water cooled closed loop system including pump and heat exchanger, (1) open barrel, 5" diameter water cooled feed throat, no hopper, 46-1/2" center line, extruder missing the drive. Includes temperature control panel with Eurotherm 808 controls. Does not include details
More Info Diameter (in.): 1.97 HP: 28 Manufacturer: NPC Model: DMG-50 74757 USED: NPC approximate 50mm twin screw extruder, model DMG50. Top vented barrel, electrically heated, water cooled, with tank, pump and heat exchanger. Water cooled feed throat with an approximate 1.5 hp crammer feeder with reducer. 7 hole strand die, 34-1/2" centerline height. Driven by a 22 kw (28 hp) DC motor. details