More Info
Manufacturer: URSCHEL
Type: 3600
Cube Size (in.): 1
42272012
Unused- Urschel Comitrol Processor, Model 3600, 304 Stainless Steel. Approximate 7'' diameter x 3'' deep cutting head, impeller driven by a 10 hp, 3/60/230/460 volt, 3525 rpm motor with a Sterns brake. 5'' Diameter x 20'' long screw feed with a stainless hopper, driven by a 2hp, 3/60/208-230/460 volt, 1740 rpm motor. Unit mounted on a stainless steel details
|
More Info
Manufacturer: Urschel
Type: cutter slicer
Cube Size (in.):
13506033
Used-Urschel Model RA-A Cutter Slicer. Three dimensional dicer features a wide selection of speeds and knife styles to give excellent results on a variety of products such as meat, cheese, pickles, vegetables, fruits and nuts. Slices, strip cuts or dices can be produced by using the required cutting spindles and adjusting the slice thickness. Slice thickness details
|
More Info
Manufacturer: WENGER
Type: CUTTING CONVEYOR
Cube Size (in.): 1
41620003
Used- Wenger Belt Cutting Conveyor, model 73003-992, 304 stainless steel. Designed to cut extruded products. Approximate 11" diameter rotor with (4) 9" long single blade bolt on knives. 9" wide x approximately 148" long rubber belt conveyor. Conveyor driven by a 3/4 hp motor thru Reeves varispeed drive, ratio 23.4:1, min 19.9, max 199. Cutter driven details
|
|
|
More Info
Manufacturer: Urschel
Type: cutter slicer
Cube Size (in.):
13506019
Used-Urschel Model RA-A Cutter Slicer. Three dimensional dicer features a wide selection of speeds and knife styles to give excellent results on a variety of products such as meat, cheese, pickles, vegetables, fruits and nuts. Slices, strip cuts or dices can be produced by using the required cutting spindles and adjusting the slice thickness. Slice Thickness: details
|
|
|
|
|
More Info
Manufacturer: Grote
Type: shredder
Cube Size (in.):
90446
USED: Grote cheese shredder, model 200-D-100, stainless steel. Approximate capacity 20# blocks of cheese. Shredder accepts a block of cheese and slices blocks directly into a shredding grate. Shredder is
capable of production from 2500 to 4500# per hour depending on size of shred. Driven by a 10 hp, 3/60/208-230/460 volt, 1725 hydraulic power pack. details
|
More Info
Manufacturer: Stephan
Type: cutter
Cube Size (in.):
89134
USED: Stephan vertical cutter-mixer, model UMC12-F/3, 304 stainless steel. (1) 12 liter jacketed mixing bowl approximately 12-1/2" diameter x 7" deep. Dished top cover with sightglass. Unit includes (1) cutting head, (1) Busch vacuum pump, (1) Hakke water bath. Mixer driven by an approximate 1.8 kw (2.5 hp), 3/60/208 volt, 150-3000 rpm motor. Mounted on details
|
More Info
Manufacturer: GERBER TECHNOLOGY
Type: CUTTER
Cube Size (in.): 1
522610
Used- Gerber Technology Gerbercutter, Model DCS 2500. Length of table 36 feet (11 meter), divisible; width of table 59" (1500mm), working width 47" (1200mm); all parts packed. European standard: 110V/20 amps, 200V- 240V/10 amps, single phase 50/60 hz (4 wire). Compressed air: 80-120 psi/0.5 scfm (5.5-8.3 bar/14 liters min). Material is held by vacuum. details
|
|
|
More Info
Manufacturer: Urschel
Type:
Cube Size (in.): 30
520671
USED: Urschel "Comitrol" mill model 1500. Features all stainless steel construction with micro cut style head, 2" pipe inlet with tri-clamp connection and 1" outlet also with tri-clamp connection, 30 hp Louis Allis "Magnetek" drive, explosion proof, rated for Class *Group D and Glass II Groups F & G. Equipped with explosion proof Dings magnetic brake, details
|
|
|
|
|
More Info
Manufacturer: Urschel
Type: Dicer/Slicer
Cube Size (in.): 4
518330
USED: Urschel dicer/slicer, model SL-A, USDA approved, stainless steel continuous operation, dices 4" blocks into cubes or strips, slicing knife, circular knife spindle, crosscut knife spindle, slices up to 1/2", dices from 1/4" to 3". 2 hp, 440 VAC, 3 ph variable speed motor. details
|
More Info
Manufacturer: Urschel
Type: Dicer
Cube Size (in.): 1
39596
USED: Urschel slicer/dicer, model L, stainless steel. Approximately (2) 8" wide rotors, driven by a 1/2 hp gearmotor. Capacity 3000 pounds per hour. 6-1/2" x 6-3/4" feed chute, discharge roll, approximate 1/2 hp motor with a discharge chute. Unit mounted on a stainless steel frame with casters. details
|