|
|
41146003
Used-JET-PRO Fluid Bed Dryer, Model 936M3, 3 sections / burners. All wetted parts are 304 Stainless steel construction. Each gas section is rated up to 10,000,000 BTU and not greater than 5 psi gas pressure. Each section designed to produce 20,400 CFM at 10 psi with 50 hp fan. Unit includes: (3) 98" Cyclones, airlock, etc.. details
|
|
|
|
|
|
|
|
|
40747002
Used- Carman Industries Fluid Bed Dryer/Cooler, Model FBP-562. Approximate 230" long x 45 1/2" wide stainless steel perforated bed. Includes a top cover, gas burner section and control panel. Also includes a New York Blower Series 20 GI fan, size 264 LS, 25 hp, 3/60/230/460 volt, 1760 rpm motor and a Series 20 GI fan, size 194 LS, 10 hp, 3/60/230/460 details
|
40747003
Used- Carman Industries Vibrating Fluid Bed Dryer, Model FBP-562, stainless steel contact surfaces, 45.5" wide x 230" long with 204" long perforated bed, (2) zone with 14' long heated zone with Stelter & Brinck gas fired burner with controls and 25 hp, 230/460 volt blower, expanded top cover, S & B serial #98028R, Carman serial #FBP-11660.
details
|
40747004
Used- Carrier Fluid Bed Dryer/Cooler, Model OAD/C-3-246D, stainless steel contact surfaces, 22'' wide x 268" long with 246" long perforated bed, 220" long expanded Davit cover, 184" long heating zone, 36" long cooling zone, Stelter and Brinks gas fired burner with controls, 5 hp, 230/460 volt vibrating motor drive, serial #20907, new 1988. details
|
REQUEST PRICE QUOTE
Width (in.): 23
Length (in.): 222
Manufacturer: CARRIER VIBRATING
Material: 304SS
40747005
Used- Carrier Vibrating Equipment Vibratory Continuous Fluid Bed Dryer/Cooler, Model QAD/C3-2460S, 304 Stainless Steel. Approximate 23" wide x 222'' long bottom screen. Stroke 3/16". Top end inlet, end bottom outlet. Driven by a 5 hp, 3/60/230/460 volt, 1725 rpm motor. Mounted on a carbon steel frame with legs. Includes top cover, 5 hp Buffalo Forge blower, details
|
40747006
Used- Carrier Fluid Bed Dryer/Cooler, Model OAD/C-3-246D, stainless steel contact surfaces, 22'' wide x 268" long with 246" long perforated bed, 220" long expanded Davit cover, 184" long heating zone, 36" long cooling zone, Stelter and Brinks gas fired burner with controls, 5 hp, 230/460 volt vibrating motor drive, serial #20906, new 1988.
details
|
|
|
REQUEST PRICE QUOTE
Width (in.): 10
Length (in.): 90
Manufacturer: Carrier
Material: Stainless Steel
87201
USED: Carrier vibratory continuous fluid bed dryer, model FTAD1240S14GA, stainless steel. Approximate 10" wide x 90" long bottom screen. Approximate 1 hp vibrating motor. Stroke 3/16". Top end inlet with hopper, end bottom outlet. Mounted on a carbon steel frame. Includes bottom screen, top cover. Built 1991. details
|
REQUEST PRICE QUOTE
Width (in.): 46.8
Length (in.): 277
Manufacturer: Vibra Maschinenfabri
Material: stainless steel
522675
USED: Vibra vibrating fluid bed dryer, type VF71/12. Material of construction is stainless steel. 46.8" wide x 277" straight side (1200mm x 7100mm). 87.9 square feet (8.52 square meter) in 3 sections, heating/cooling area. Inlet 4840 lbs (2200 kgs) at TS 93.3% at 140 deg F (60 deg C) per hour. Outlet 4657 lbs (2117 kgs) at TS 97.2% at 111.9 deg F (44.4 details
|
|
|
|
|
|
|
|
|
|
|
REQUEST PRICE QUOTE
Width (in.): 32
Length (in.): 184.8
Manufacturer: APV
Material: 304 Stainless Steel
79710
USED: APV continuous fluid bed dryer, model FBTS2, 304 stainless steel. 32" wide x 185" long perforated screen. Inner spray balls, insulated top cover. 30" top opening, approximate 8" side top inlet, 9-1/2" x 5" side outlet. (1) 17 x 11, (1) 37 x 11 side air inlets. Mounted on 4 legs. Approximate 29" high discharge height. details
|
REQUEST PRICE QUOTE
Width (in.): 32
Length (in.): 184.8
Manufacturer: APV
Material: 304 Stainless Steel
79711
USED: APV continuous fluid bed dryer, model FBTS2, 304 stainless steel. 32" wide x 185" long perforated screen. Inner spray balls, insulated top cover. 30" top opening, approximate 8" side top inlet, 9-1/2" x 5" side outlet. (1) 17 x 11, (1) 37 x 11 side air inlets. Mounted on 4 legs. Approximate 29" high discharge height. details
|
REQUEST PRICE QUOTE
Width (in.): 16
Length (in.): 260.4
Manufacturer: Frank Hamachek Machi
Material: Stainless Steel
78517
USED:Frank Hamachek Machine Co vibratory fluid bed dryer, stainlesssteel. 16" wide x 259" long 3 zone bed, (6) 8" top inlets, (1) 8"side bottom outlet, 40" discharge height, 3 hinged covers. Driven bya 3 hp, 1750 rpm, 3/60/230/460 volt motor. Mounted on stainless steel stand. details
|
|
|
|
|
63802
USED: Harpring fluid bed dryer, type 8-674. Non-vibrating bed. Size 18" wide x 60" long with 31" high walls. Steam heated through a USA Coil & Air model 12x18, 1"/ 3/4" in/out. Approximate 5 to 7-1/2 hp blower. 4 compartment heat zone (adjustable). 9-1/2" x 22-1/2" feed opening. Discharge screen with 1/3 hp 208-230/460 1725 rpm scraper motor. Includes snap details
|
REQUEST PRICE QUOTE
Width (in.): 32
Length (in.): 156
Manufacturer: Strong Scott
Material: Stainless Steel
63528
USED: Strong Scott continuous fluid bed dryer system. Stainless steel construction, consisting of: Scott fluid bed dryer 32" wide x 13' long, approximately 32 square feet of drying area; (1) feeder bin 36" deep x 36" straight side x 41" cone bottom with 18" x 18" air lock; (3) Buffalo blowers: 1 size 60, no motor, 1 size 50, 60 hp motor, 1 size 45, 25 details
|