|
|
|
|
|
|
40557002
Used- Ferrell-Ross horizontal double drum flaker. (2) manually adjustable approximately 18" diameter x 36" face cored carbon steel rolls. Each roll driven by a 15 hp, 3/6/60/230/460 volt, 1765 rpm motor with a Dodge torque arm reducer, ratio 25.26 to 1. (2) manually adjustable bottom knife scrapers, top gravity feed with hopper. Mounted on a frame. details
|
89105
USED: Blaw Knox single drum flaker, 316 stainless steel. 24" diameter x 24" face cored drum rated 60 psi at 350 deg F. Driven by a 1.5 hp, 3/60/208-230/460 volt, 1725 rpm XP gearmotor, ratio 57.7:1. Unit includes a bolt-on stainless steel vapor hood, side access doors, (2) end fixed scrapers, (1) pneumatically operated knife scraper (no blade) and a jacketed details
|
522281
USED: Single drum flake roll. Drum is 4' diameter x 9' long. Last used for flaking shortening. This flake roll was custom built and was rebuilt and re-chromed circa 1990. Last used in Sept. 2006.The frame and supports are carbon steel; it is chain/gear motor driven on the end, and the roll is chrome plated. 9 liquid feed nozzles. Includes roll, motor details
|
84312
USED: Buflovak double drum dryer, (2) 12" diameter x 18" face chrome plated cored rolls, (2) manually adjustable scraper blades, (2) edge guides. Driven by a 1.5 hp, 3/60/230/460 volt, 1725 rpm XP varispeed motor, ratio 144:1, min/max rpm 3.21/28.9. Includes vapor hood with sight window. Mounted on a 22" tall carbon steel table. Built 1989. details
|
|
|
|
|
|
|
|
|
|
|
73731
USED: Buflovak double drum dryer, 42" diameter x 90" face. Carbon steel drums with all stainless steel welted surface. Includes stainless steel fume hood, stainless steel knife discharge, two stainless steel screw conveyors and a drive. Splash fed. Drive data: drum 10 hp @ 20.9 to 84 rpm, 460 volts, with Dodge gear 4.9:1 ratio; splash roll drive 3 hp details
|
72547
USED: Buflovak lab size double drum dryer, type ALC-5. Carbon steel construction. (2) 5.85" diameter x 7.8" straight side (150mm dia x 200mm st side) rolls. Side by side. Driven via two gearboxes with both gear reducers by (1) 1/4 hp, 230 volt/60/50 cycle/3 ph motor and (1) 1/3 hp, 115/230volt/50 cycle/3 ph motor. Table mounted. On 4 legs. details
|
|
|
42924
USED: Bethlehem/Simons chrome plated chill roll, 36" face x 32" dia.Unit has (2) 36" long x 12" dia feed rolls, cored for heating orcooling. 1 feed roll driven by 3 hp 3/60/230-460V Reeves varidrive,other feed roll fixed. Product is pressed onto main chill roll byrubber belt w/adjustable thickness control roller. Knife dischargeoff chill roll onto 4" details
|